PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
NAME
printf, fprintf, sprintf - print formatted output
SYNOPSIS
#include <stdio.h>
int printf(const char *format, .../* args */);
int fprintf(FILE *strm, const char *format, .../* args */);
int sprintf(char *s, const char *format, .../* args */);
DESCRIPTION
printf places output on the standard output stream stdout.
fprintf places output on strm.
sprintf places output, followed by the null character (\0),
in consecutive bytes starting at s. It is the user's
responsibility to ensure that enough storage is available.
Each function returns the number of characters transmitted
(not including the \0 in the case of sprintf) or a negative
value if an output error was encountered.
Each of these functions converts, formats, and prints its
args under control of the format. The format is a character
string that contains three types of objects defined below:
stream;
plain characters that are simply copied to the output
escape sequences that represent non-graphic characters;
conversion specifications.
The following escape sequences produce the associated action
on display devices capable of the action:
\a Alert. Ring the bell.
\b Backspace. Move the printing position to one character
before the current position, unless the current posi-
tion is the start of a line.
\f Form feed. Move the printing position to the initial
printing position of the next logical page.
\n Newline. Move the printing position to the start of
the next line.
\r Carriage return. Move the printing position to the
start of the current line.
\t Horizontal tab. Move the printing position to the next
Printed 11/19/92 Page 1
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
implementation-defined horizontal tab position on the
current line.
\v Vertical tab. Move the printing position to the start
of the next implementation-defined vertical tab posi-
tion.
All forms of the printf functions allow for the insertion of
a language-dependent decimal-point character. The decimal-
point character is defined by the program's locale (category
LC_NUMERIC). In the C locale, or in a locale where the
decimal-point character is not defined, the decimal-point
character defaults to a period (.).
Each conversion specification is introduced by the character
%. After the character %, the following appear in sequence:
An optional field, consisting of a decimal digit string
followed by a $, specifying the next args to be con-
verted. If this field is not provided, the args fol-
lowing the last args converted will be used.
Zero or more flags, which modify the meaning of the
conversion specification.
An optional string of decimal digits to specify a
minimum field width. If the converted value has fewer
characters than the field width, it will be padded on
the left (or right, if the left-adjustment flag (-),
described below, has been given) to the field width.
An optional precision that gives the minimum number of
digits to appear for the d, i, o, u, x, or X conver-
sions (the field is padded with leading zeros), the
number of digits to appear after the decimal-point
character for the e, E, and f conversions, the maximum
number of significant digits for the g and G conver-
sions, or the maximum number of characters to be
printed from a string in s conversion. The precision
takes the form of a period (.) followed by a decimal
digit string; a null digit string is treated as zero.
Padding specified by the precision overrides the pad-
ding specified by the field width.
An optional h specifies that a following d, i, o, u, x,
or X conversion specifier applies to a short int or
unsigned short int argument (the argument will be pro-
moted according to the integral promotions and its
value converted to short int or unsigned short int
before printing); an optional h specifies that a fol-
lowing n conversion specifier applies to a pointer to a
short int argument. An optional l (ell) specifies that
Page 2 Printed 11/19/92
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
a following d, i, o, u, x, or X conversion specifier
applies to a long int or unsigned long int argument; an
optional l (ell) specifies that a following n conver-
sion specifier applies to a pointer to long int argu-
ment. An optional L specifies that a following e, E,
f, g, or G conversion specifier applies to a long dou-
ble argument. If an h, l, or L appears before any
other conversion specifier, the behavior is undefined.
A conversion character (see below) that indicates the
type of conversion to be applied.
A field width or precision may be indicated by an asterisk
(*) instead of a digit string. In this case, an integer
args supplies the field width or precision. The args that
is actually converted is not fetched until the conversion
letter is seen, so the args specifying field width or preci-
sion must appear before the args (if any) to be converted.
If the precision argument is negative, it will be changed to
zero. A negative field width argument is taken as a - flag,
followed by a positive field width.
In format strings containing the *digits$ form of a conver-
sion specification, a field width or precision may also be
indicated by the sequence *digits$, giving the position in
the argument list of an integer args containing the field
width or precision.
When numbered argument specifications are used, specifying
the Nth argument requires that all the leading arguments,
from the first to the (N-1)th, be specified in the format
string.
The flag characters and their meanings are:
- The result of the conversion will be left-justified
within the field. (It will be right-justified if this
flag is not specified.)
+ The result of a signed conversion will always begin
with a sign (+ or -). (It will begin with a sign only
when a negative value is converted if this flag is not
specified.)
space
If the first character of a signed conversion is not a
sign, a space will be placed before the result. This
means that if the space and + flags both appear, the
space flag will be ignored.
# The value is to be converted to an alternate form. For
c, d, i, s, and u conversions, the flag has no effect.
Printed 11/19/92 Page 3
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
For an o conversion, it increases the precision to
force the first digit of the result to be a zero. For
x (or X) conversion, a non-zero result will have 0x (or
0X) prepended to it. For e, E, f, g, and G conver-
sions, the result will always contain a decimal-point
character, even if no digits follow the point (nor-
mally, a decimal point appears in the result of these
conversions only if a digit follows it). For g and G
conversions, trailing zeros will not be removed from
the result as they normally are.
0 For d, i, o, u, x, X, e, E, f, g, and G conversions,
leading zeros (following any indication of sign or
base) are used to pad to the field width; no space pad-
ding is performed. If the 0 and flags both appear,
the 0 flag will be ignored. For d, i, o, u, x, and X
conversions, if a precision is specified, the 0 flag
will be ignored. For other conversions, the behavior
is undefined.
Each conversion character results in fetching zero or more
args. The results are undefined if there are insufficient
args for the format. If the format is exhausted while args
remain, the excess args are ignored.
The conversion characters and their meanings are:
d,i,o,u,x,X The integer arg is converted to signed
decimal (d or i), (unsigned octal (o),
unsigned decimal (u), or unsigned hexadecimal
notation (x and X). The x conversion uses
the letters abcdef and the X conversion uses
the letters ABCDEF. The precision specifies
the minimum number of digits to appear. If
the value being converted can be represented
in fewer digits than the specified minimum,
it will be expanded with leading zeros. The
default precision is 1. The result of con-
verting a zero value with a precision of zero
is no characters.
f The double args is converted to decimal nota-
tion in the style [-]ddd.ddd, where the
number of digits after the decimal-point
character [see setlocale(3C)] is equal to the
precision specification. If the precision is
omitted from arg, six digits are output; if
the precision is explicitly zero and the #
flag is not specified, no decimal-point char-
acter appears. If a decimal-point character
appears, at least 1 digit appears before it.
The value is rounded to the appropriate
Page 4 Printed 11/19/92
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
number of digits.
e,E The double args is converted to the style
[-]d.ddde+dd, where there is one digit before
the decimal-point character (which is non-
zero if the argument is non-zero) and the
number of digits after it is equal to the
precision. When the precision is missing,
six digits are produced; if the precision is
zero and the # flag is not specified, no
decimal-point character appears. The E
conversion character will produce a number
with E instead of e introducing the exponent.
The exponent always contains at least two
digits. The value is rounded to the
appropriate number of digits.
g,G The double args is printed in style f or e
(or in style E in the case of a G conversion
character), with the precision specifying the
number of significant digits. If the preci-
sion is zero, it is taken as one. The style
used depends on the value converted: style e
(or E) will be used only if the exponent
resulting from the conversion is less than -4
or greater than or equal to the precision.
Trailing zeros are removed from the frac-
tional part of the result. A decimal-point
character appears only if it is followed by a
digit.
c The int args is converted to an unsigned
char, and the resulting character is printed.
s The args is taken to be a string (character
pointer) and characters from the string are
written up to (but not including) a terminat-
ing null character; if the precision is
specified, no more than that many characters
are written. If the precision is not speci-
fied, it is taken to be infinite, so all
characters up to the first null character are
printed. A NULL value for args will yield
undefined results.
p The args should be a pointer to void. The
value of the pointer is converted to an
implementation-defined set of sequences of
printable characters, which should be the
same as the set of sequences that are matched
by the %p conversion of the scanf function.
Printed 11/19/92 Page 5
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
n The argument should be a pointer to an
integer into which is written the number of
characters written to the output standard I/O
stream so far by this call to printf,
fprintf, or sprintf. No argument is con-
verted.
% Print a %; no argument is converted.
If the character after the % or %digits$ sequence is not a
valid conversion character, the results of the conversion
are undefined.
If a floating-point value is the internal representation for
infinity, the output is [+]inf, where inf is either inf or
INF, depending on the conversion character. Printing of the
sign follows the rules described above.
If a floating-point value is the internal representation for
not-a-number, the output is [+]nan0xm. Depending on the
conversion character, nan is either nan or NAN. Addition-
ally, 0xm represents the most significant part of the
mantissa. Again depending on the conversion character, x
will be x or X, and m will use the letters abcdef or ABCDEF.
Printing of the sign follows the rules described above.
In no case does a non-existent or small field width cause
truncation of a field; if the result of a conversion is
wider than the field width, the field is simply expanded to
contain the conversion result. Characters generated by
printf and fprintf are printed as if the putc routine had
been called.
EXAMPLE
To print a date and time in the form Sunday, July 3, 10:02,
where weekday and month are pointers to null-terminated
strings:
printf("%s, %s %i, %d:%.2d",
weekday, month, day, hour, min);
To print π to 5 decimal places:
printf("pi = %.5f", 4 * atan(1.0));
SEE ALSO
exit(2), lseek(2), write(2), abort(3C), ecvt(3C), putc(3S),
scanf(3S), setlocale(3C), stdio(3S).
DIAGNOSTICS
printf, fprintf, and sprintf return the number of characters
transmitted, or return a negative value if an error was
Page 6 Printed 11/19/92
PRINTF(3S-SVR4) RISC/os Reference Manual PRINTF(3S-SVR4)
encountered.
Printed 11/19/92 Page 7