MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
NAME
make, makerules - maintain, update, and regenerate groups of
programs
SYNOPSIS
make [-f makefile] [-p] [-i] [-k] [-s] [-r] [-n] [-b] [-e]
[-m] [-t] [-d] [-q] [names]
makerules
DESCRIPTION
This version of make is based on the UNIX System V make,
with some modifications. Modifications include:
1. BRL System V emulation support has been added.
2. The SHELL environment variable is not imported. To
use a different shell, the macro must be set in the
makefile, or on the command line.
3. When commands exit due to signals (such as segmenta-
tion violation), the message printed will give the sig-
nal name. Core dumps will also be noted.
The command makerules simply prints out all of the builtin
rules, which are used by default.
The following is a brief description of all options and some
special names:
-f makefile Description file name. makefile is assumed to
be the name of a description file. A file name
of - denotes the standard input. The contents
of makefile override the built-in rules if they
are present.
-p Print out the complete set of macro definitions
and target descriptions.
-i Ignore error codes returned by invoked com-
mands. This mode is entered if the fake target
name .IGNORE appears in the description file.
-k Abandon work on the current entry, but continue
on other branches that do not depend on that
entry.
-s Silent mode. Do not print command lines before
executing. This mode is also entered if the
fake target name .SILENT appears in the
description file.
-r Do not use the built-in rules.
Printed 1/15/91 Page 1
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
-n No execute mode. Print commands, but do not
execute them. Even lines beginning with an @
are printed.
-b Compatibility mode for old makefiles.
-e Environment variables override assignments
within makefiles.
-m Print a memory map showing text, data, and
stack. This option is a no-operation on sys-
tems without the getu system call.
-t Touch the target files (causing them to be up-
to-date) rather than issue the usual commands.
-d Debug mode. Print out detailed information on
files and times examined.
-q Question. The make command returns a zero or
non-zero status code depending on whether the
target file is or is not up-to-date.
.DEFAULT If a file must be made but there are no expli-
cit commands or relevant built-in rules, the
commands associated with the name .DEFAULT are
used if it exists.
.PRECIOUS Dependents of this target will not be removed
when quit or interrupt are hit.
.SILENT Same effect as the -s option.
.IGNORE Same effect as the -i option.
make executes commands in makefile to update one or more
target names. name is typically a program. If no -f option
is present, makefile, Makefile, s.makefile, and s.Makefile
are tried in order. If makefile is -, the standard input is
taken. More than one - makefile argument pair may appear.
make updates a target only if its dependents are newer than
the target. All prerequisite files of a target are added
recursively to the list of targets. Missing files are
deemed to be out of date. (NOTE: Files that have a modifi-
cation date of 0, which is equivalent to the date Jan 1
00:00:00 GMT 1970, are handled as missing files. Such
modification dates are (almost) always artificial, and are
thus unexpected.)
makefile contains a sequence of entries that specify depen-
dencies. The first line of an entry is a blank-separated,
Page 2 Printed 1/15/91
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
non-null list of targets, then a :, then a (possibly null)
list of prerequisite files or dependencies. Text following
a ; and all following lines that begin with a tab are shell
commands to be executed to update the target. The first
line that does not begin with a tab or # begins a new depen-
dency or macro definition. Shell commands may be continued
across lines with the <backslash><new-line> sequence.
Everything printed by make (except the initial tab) is
passed directly to the shell as is. Thus,
echo a\
b
will produce
ab
exactly the same as the shell would.
Sharp (#) and new-line surround comments.
The following makefile says that pgm depends on two files
a.o and b.o, and that they in turn depend on their
corresponding source files (a.c and b.c) and a common file
incl.h:
pgm: a.o b.o
cc a.o b.o -o pgm
a.o: incl.h a.c
cc -c a.c
b.o: incl.h b.c
cc -c b.c
Command lines are executed one at a time, each by its own
shell. The first one or two characters in a command can be
the following: -, @, -@, or @-. If @ is present, printing
of the command is suppressed. If - is present, make ignores
an error. A line is printed when it is executed unless the
-s option is present, or the entry .SILENT: is in makefile,
or unless the initial character sequence contains a @. The
-n option specifies printing without execution; however, if
the command line has the string $(MAKE) in it, the line is
always executed (see discussion of the MAKEFLAGS macro under
Environment). The -t (touch) option updates the modified
date of a file without executing any commands.
Commands returning non-zero status normally terminate make.
If the -i option is present, or the entry .IGNORE: appears
in makefile, or the initial character sequence of the com-
mand contains -. the error is ignored. If the -k option is
present, work is abandoned on the current entry, but contin-
ues on other branches that do not depend on that entry.
Printed 1/15/91 Page 3
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
The -b option allows old makefiles (those written for the
old version of make) to run without errors. The difference
between the old version of make and this version is that
this version requires all dependency lines to have a (possi-
bly null or implicit) command associated with them. The
previous version of make assumed, if no command was speci-
fied explicitly, that the command was null.
Interrupt and quit cause the target to be deleted unless the
target is a dependent of the special name .PRECIOUS.
Environment
The environment is read by make. All variables are assumed
to be macro definitions and processed as such. The environ-
ment variables are processed before any makefile and after
the internal rules; thus, macro assignments in a makefile
override environment variables. The -e option causes the
environment to override the macro assignments in a makefile.
The MAKEFLAGS environment variable is processed by make as
containing any legal input option (except -f, -p, and -d)
defined for the command line. Further, upon invocation,
make ``invents'' the variable if it is not in the environ-
ment, puts the current options into it, and passes it on to
invocations of commands. Thus, MAKEFLAGS always contains
the current input options. This proves very useful for
``super-makes''. In fact, as noted above, when the -n
option is used, the command $(MAKE) is executed anyway;
hence, one can perform a make -n recursively on a whole
software system to see what would have been executed. This
is because the -n is put in MAKEFLAGS and passed to further
invocations of $(MAKE). This is one way of debugging all of
the makefiles for a software project without actually doing
anything.
Macros
Entries of the form string1 = string2 are macro definitions.
String2 is defined as all characters up to a comment charac-
ter or an unescaped new-line. Subsequent appearances of
$(string1[:subst1=[subst2]]) are replaced by string2. The
parentheses are optional if a single character macro name is
used and there is no substitute sequence. The optional
:subst1=subst2 is a substitute sequence. If it is speci-
fied, all non-overlapping occurrences of subst1 in the named
macro are replaced by subst2. Strings (for the purposes of
this type of substitution) are delimited by blanks, tabs,
new-line characters, and beginnings of lines. An example of
the use of the substitute sequence is shown under Libraries.
Internal Macros
There are five internally maintained macros which are useful
for writing rules for building targets.
Page 4 Printed 1/15/91
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
$* The macro $* stands for the file name part of the
current dependent with the suffix deleted. It is
evaluated only for inference rules.
$@ The $@ macro stands for the full target name of the
current target. It is evaluated only for explicitly
named dependencies.
$< The $< macro is only evaluated for inference rules or
the .DEFAULT rule. It is the module which is out-of-
date with respect to the target (i.e., the ``manufac-
tured'' dependent file name). Thus, in the .c.o rule,
the $< macro would evaluate to the .c file. An example
for making optimized .o files from .c files is:
.c.o:
cc -c -O $*.c
or:
.c.o:
cc -c -O $<
$? The $? macro is evaluated when explicit rules from the
makefile are evaluated. It is the list of prere-
quisites that are out of date with respect to the tar-
get; essentially, those modules which must be rebuilt.
$% The $% macro is only evaluated when the target is an
archive library member of the form lib(file.o). In
this case, $@ evaluates to lib and $% evaluates to the
library member, file.o.
Four of the five macros can have alternative forms. When an
upper case D or F is appended to any of the four macros, the
meaning is changed to ``directory part'' for D and ``file
part'' for F. Thus, $(@D) refers to the directory part of
the string $@. If there is no directory part, ./ is gen-
erated. The only macro excluded from this alternative form
is $?. The reasons for this are debatable.
Suffixes
Certain names (for instance, those ending with .o) have
inferable prerequisites such as .c, .s, etc. If no update
commands for such a file appear in makefile, and if an
inferable prerequisite exists, that prerequisite is compiled
to make the target. In this case, make has inference rules
which allow building files from other files by examining the
suffixes and determining an appropriate inference rule to
use. The current default inference rules are:
.c.c~ .sh.sh~ .c.o .c~.o .c~.c .s.o .s~.o .y.o .y~.o
.l.o .l~.o .y.c .y~.c .l.c .c.a .c~.a .s~.a .h~.h
Printed 1/15/91 Page 5
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
The internal rules for make are contained in the source file
rules.c for the make program. These rules can be locally
modified. To print out the rules compiled into the make on
any machine in a form suitable for recompilation, the fol-
lowing command is used:
make -fp - 2>/dev/null </dev/null
The only peculiarity in this output is the (null) string
which printf(3S) prints when handed a null string.
A tilde in the above rules refers to an SCCS file (see
sccsfile(4)). Thus, the rule .c~.o would transform an SCCS
C source file into an object file (.o). Because the s. of
the SCCS files is a prefix, it is incompatible with make's
suffix point-of-view. Hence, the tilde is a way of changing
any file reference into an SCCS file reference.
A rule with only one suffix (i.e., .c:) is the definition of
how to build x from x.c. In effect, the other suffix is
null. This is useful for building targets from only one
source file (e.g., shell procedures, simple C programs).
Additional suffixes are given as the dependency list for
.SUFFIXES. Order is significant; the first possible name
for which both a file and a rule exist is inferred as a
prerequisite. The default list is:
.SUFFIXES: .o .c .y .l .s
Here again, the above command for printing the internal
rules will display the list of suffixes implemented on the
current machine. Multiple suffix lists accumulate; .SUF-
FIXES: with no dependencies clears the list of suffixes.
Inference Rules
The first example can be done more briefly.
pgm: a.o b.o
cc a.o b.o -o pgm
a.o b.o: incl.h
This is because make has a set of internal rules for build-
ing files. The user may add rules to this list by simply
putting them in the makefile.
Certain macros are used by the default inference rules to
permit the inclusion of optional matter in any resulting
commands. For example, CFLAGS, LFLAGS, and YFLAGS are used
for compiler options to cc(1), lex(1), and yacc(1), respec-
tively. Again, the previous method for examining the
current rules is recommended.
Page 6 Printed 1/15/91
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
The inference of prerequisites can be controlled. The rule
to create a file with suffix .o from a file with suffix .c
is specified as an entry with .c.o: as the target and no
dependents. Shell commands associated with the target
define the rule for making a .o file from a .c file. Any
target that has no slashes in it and starts with a dot is
identified as a rule and not a true target.
Libraries
If a target or dependency name contains parentheses, it is
assumed to be an archive library, the string within
parentheses referring to a member within the library. Thus
lib(file.o) and $(LIB)(file.o) both refer to an archive
library which contains file.o. (This assumes the LIB macro
has been previously defined.) The expression $(LIB)(file1.o
file2.o) is not legal. Rules pertaining to archive
libraries have the form .XX.a where the XX is the suffix
from which the archive member is to be made. An unfortunate
byproduct of the current implementation requires the XX to
be different from the suffix of the archive member. Thus,
one cannot have lib(file.o) depend upon file.o explicitly.
The most common use of the archive interface follows. Here,
we assume the source files are all C type source:
lib:
lib(file1.o) lib(file2.o) lib(file3.o)
@echo lib is now up-to-date
.c.a:
$(CC) -c $(CFLAGS) $<
ar rv $@ $*.o
rm -f $*.o
In fact, the .c.a rule listed above is built into make and
is unnecessary in this example. A more interesting, but
more limited example of an archive library maintenance con-
struction follows:
lib:
lib(file1.o) lib(file2.o) lib(file3.o)
$(CC) -c $(CFLAGS) $(?:.o=.c)
ar rv lib $?
rm $?
@echo lib is now up-to-date
.c.a:;
Here the substitution mode of the macro expansions is used.
The $? list is defined to be the set of object file names
(inside lib) whose C source files are out-of-date. The sub-
stitution mode translates the .o to .c. (Unfortunately, one
cannot as yet transform to .c~; however, this may become
possible in the future.) Note also, the disabling of the
.c.a: rule, which would have created each object file, one
Printed 1/15/91 Page 7
MAKE(1-BSD) RISC/os Reference Manual MAKE(1-BSD)
by one. This particular construct speeds up archive library
maintenance considerably. This type of construct becomes
very cumbersome if the archive library contains a mix of
assembly programs and C programs.
FILES
makefile
Makefile
s.makefile
s.Makefile
SEE ALSO
cc(1), cd(1), lex(1), sh(1), yacc(1).
printf(3S), sccsfile(4) in the Programmer's Reference
Manual.
BUGS
Some commands return non-zero status inappropriately; use -i
to overcome the difficulty. File names with the characters
= : @ will not work. Commands that are directly executed by
the shell, notably cd(1), are ineffectual across new-lines
in make. The syntax (lib(file1.o file2.o file3.o) is ille-
gal. You cannot build lib(file.o) from file.o. The macro
$(a:.o=.c~) does not work.
Page 8 Printed 1/15/91