NAME

allocb − allocate a message block

SYNOPSIS

#include <sys/stream.h>
mblk_t ∗allocb(int size, uint pri);

INTERFACE LEVEL

Architecture independent level 1 (DDI/DKI). 

ARGUMENTS

size The number of bytes in the message block. 

pri Priority of the request (no longer used). 

DESCRIPTION

allocb() tries to allocate a STREAMS message block.  Buffer allocation fails only when the system is out of memory.  If no buffer is available, the bufcall(9F) function can help a module recover from an allocation failure. 

A STREAMS message block is composed of three structures.  The first structure is a message block (mblk_t).  See msgb(9S).  The mblk_t structure points to a data block structure (dblk_t).  See datab(9S).  Together these two structures describe the message type (if applicable) and the size and location of the third structure, the data buffer.  The data buffer contains the data for this message block. 

The fields in the mblk_t structure are initialized as follows:

b_cont set to NULL

b_rptr points to the beginning of the data buffer

b_wptr points to the beginning of the data buffer

b_datap points to the dblk_t structure

The fields in the dblk_t structure are initialized as follows:

db_base points to the first byte of the data buffer

db_lim points to the last byte + 1 of the buffer

db_type set to M_DATA

The following figure identifies the data structure members that are affected when a message block is allocated. 

b_cont (0)
b_rptr
b_wptr
b_datap
message block
(mblk_t)
data block
(dblk_t)
data buffer
















.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.




db_base
db_lim
db_type (M_DATA)

RETURN VALUES

A pointer to the allocated message block of type M_DATA on success. 

A NULL pointer on failure. 

CONTEXT

allocb() can be called from user or interrupt context. 

EXAMPLES

Given a pointer to a queue ( q ) and an error number ( err ), the send_error() routine sends an M_ERROR type message to the stream head. 

If a message cannot be allocated, NULL is returned, indicating an allocation failure (line 8).  Otherwise, the message type is set to M_ERROR (line 10).  Line 11 increments the write pointer (bp->b_wptr) by the size (one byte) of the data in the message. 

A message must be sent up the read side of the stream to arrive at the stream head.  To determine whether q points to a read queue or to a write queue, the q->q_flag member is tested to see if QREADR is set (line 13).  If it is not set, q points to a write queue, and in line 14 the RD(9F) function is used to find the corresponding read queue.  In line 15, the putnext(9F) function is used to send the message upstream, returning 1 if successful. 

 1  send_error(q,err)
 2  queue_t ∗q;
 3  unsigned char err;
 4  {
 5  mblk_t ∗bp;
 6
 7  if ((bp = allocb(1, BPRI_HI)) == NULL) /∗ allocate msg. block ∗/
 8  return(0);
 9
10  bp->b_datap->db_type = M_ERROR; /∗ set msg type to M_ERROR ∗/
11  ∗bp->b_wptr++ = err;/∗ increment write pointer ∗/
12
13  if (!(q->q_flag & QREADR))/∗ if not read queue     ∗/
14  q = RD(q);/∗    get read queue     ∗/
15  putnext(q,bp);/∗ send message upstream ∗/
16  return(1);
17  }

SEE ALSO

bufcall(9F), esballoc(9F), esbbcall(9F), putnext(9F), RD(9F), testb(9F), datab(9S), msgb(9S)

Writing Device Drivers
STREAMS Programming Guide

NOTES

The pri argument is no longer used, but is retained for compatibility with existing drivers. 

SunOS 5.5/x86  —  Last change: 20 Jul 1994