NAME

in.telnetd − DARPA TELNET protocol server

SYNOPSIS

/usr/sbin/in.telnetd

AVAILABILITY

SUNWcsu

DESCRIPTION

in.telnetd is a server that supports the DARPA standard TELNET virtual terminal protocol.  in.telnetd is invoked by the internet server (see inetd(1M)), normally for requests to connect to the TELNET port as indicated by the /etc/services file (see services(4)). 

in.telnetd operates by allocating a pseudo-terminal device for a client, then creating a login process which has the slave side of the pseudo-terminal as its standard input, output, and error.  in.telnetd manipulates the master side of the pseudo-terminal, implementing the TELNET protocol and passing characters between the remote client and the login process. 

When a TELNET session is started up, in.telnetd sends TELNET options to the client side indicating a willingness to do remote echo of characters, to suppress go ahead, and to receive terminal type information from the remote client.  If the remote client is willing, the remote terminal type is propagated in the environment of the created login process.  The pseudo-terminal allocated to the client is configured to operate in “cooked” mode, and with XTABS, ICRNL, and ONLCR enabled (see termio(7)). 

in.telnetd is willing to do: echo, binary, suppress go ahead, and timing mark. in.telnetd is willing to have the remote client do: binary, terminal type, and suppress go ahead.

SEE ALSO

telnet(1), services(4), termio(7)

Postel, Jon, and Joyce Reynolds, “Telnet Protocol Specification,” RFC 854, Network Information Center, SRI International, Menlo Park, Calif., May 1983. 

NOTES

Some TELNET commands are only partially implemented. 

The TELNET protocol allows for the exchange of the number of lines and columns on the user’s terminal, but in.telnetd doesn’t make use of them. 

Binary mode has no common interpretation except between similar operating systems

The terminal type name received from the remote client is converted to lower case. 

The packet interface to the pseudo-terminal should be used for more intelligent flushing of input and output queues. 

in.telnetd never sends TELNET go ahead commands. 

in.telnetd can only support 64 pseudo-terminals. 

SunOS 5.2  —  Last change: 14 Sep 1992