NAME

sc − SCSI Rimfire Host Adaptor Driver

CONFIG

controller sc0 at vme24d16 ? csr 0x5000 dma vme24d32 priority 2 vector scintr 0xf4

DESCRIPTION

All SCSI devices in a Solbourne system use a three layer device driver scheme. The top layer supports a specific type of device (for example disk sd(4s), or tape st(4s)), the middle layer contains common code (scsi(4)), and the lower layer supports specific host adaptor hardware (for example SCSI IOASIC si(4), or SCSI Rimfire sc(4s)).  This man page describes the low layer operations for the SCSI Rimfire host adaptor. 

The controller line above describes the SCSI Rimfire host adapter on the VMEbus of s Solbourne system. 

SEE ALSO

scsi(4S), sd(4S), st(4S)

Solbourne Computer, Inc.  —  18 February 1988