slink(ADMN) 19 June 1992 slink(ADMN) Name slink - streams linker Syntax slink [-v] [-f] [ -c file] [func [arg1 arg2 ...]] Description slink is a STREAMS configuration utility which is used to link together the various STREAMS modules and drivers required for STREAMS TCP/IP. Input to slink is in the form of a script specifying the STREAMS opera- tions to be performed. Input is normally taken from the file /etc/strcf. The following options may be specified on the slink command line: -c file Use file instead of /etc/strcf. -v Verbose mode (each operation is logged to stderr). -f Don't fork (i.e. slink will remain in foreground). The configuration file contains a list of functions, each of which is composed of a list of commands. Each command is a call to one of the functions defined in the configuration file or to one of a set of built- in functions. Among the built-in functions are the basic STREAMS opera- tions open, link, and push, along with several TCP/IP-specific functions. slink processing consists of parsing the input file, then calling the user-defined function boot, which is normally used to set up the standard configuration at boot time. If a function is specified on the slink com- mand line, that function will be called instead of boot. Following the execution of the specified function, slink goes into the background and remains idle, holding open whatever file descriptors have been opened by the configuration commands. A function definition has the following form: function-name { command1 command2 ... } The syntax for commands is: function arg1 arg2 arg3 ... or var = function arg1 arg2 arg3 ... The placement of newlines is important: a newline must follow the left and right braces and every command. Extra newlines are allowed, i.e. where one newline is required, more than one may be used. A backslash ``\'' followed immediately by a newline is considered equivalent to a space, i.e. may be used to continue a command on a new line. The use of other white space characters (spaces and tabs) is at the discretion of the user, except that there must be white space separating the function name and the arguments of a command. Comments are delimited by ``#'' and newline, and are considered equivalent to a newline. Function and variable names may be any string of characters taken from A-Z, a-z, 0-9, and ``_'', except that the first character cannot be a digit. Function names and variable names occupy separate name spaces. All functions are global and may be forward referenced. All variables are local to the functions in which they occur. Variables are defined when they appear to the left of an equals ``='' on a command line, e.g. tcp = open /dev/inet/tcp The variable acquires the value returned by the command. In the above example, the value of the variable tcp will be the file descriptor returned by the open call. Arguments to a command may be either variables, parameters, or strings. A variable that appears as an argument must have been assigned a value on a previous command line in that function. Parameters take the form of a dollar sign ``$'' followed by one or two decimal digits, and are replaced with the corresponding argument from the function call. If a given parameter was not specified in the function call, an error results (e.g. if a command references $3 and only two arguments were passed to the function, an execution error will occur). Strings are sequences of characters optionally enclosed in double quotes `"'. Quotes may be used to prevent a string from being interpreted as a variable name or a parameter, and to allow the inclusion of spaces, tabs, and the special characters ``{ } D'' and ``#''. The backslash ``\'' may also be used to quote the characters ``{ } , = " # '', and ``\'' individ- ually. The following built-in functions are provided by slink: open path Open the device specified by pathname path. Returns a file descriptor referencing the open stream. link fd1 fd2 Link the stream referenced by fd2 beneath the stream referenced by fd1. Returns the link identifier associ- ated with the link. Note: fd2 cannot be used after this operation. push fd module Push the module module onto the stream referenced by fd. sifname fd link name Send a SIOCSIFNAME (set interface name) ioctl down the stream referenced by fd for the link associated with link identifier link specifying the name name. unitsel fd unit Send a IF_UNITSEL (unit select) ioctl down the stream referenced by fd specifying unit unit. dlattach fd unit Send a DL_ATTACH_REQ message down the stream referenced by fd specifying unit unit. initqp path qname lowat hiwat ... Send an INITQPARMS (initialize queue parameters) ioctl to the driver corresponding to pathname path. qname specifies the queue for which the low and high water marks will be set, and must be one of: hd stream head rq read queue wq write queue muxrq multiplexor read queue muxwq multiplexor write queue lowat and hiwat specify the new low and high water marks for the queue. Both lowat and hiwat must be present. To change only one of these parameters, the other may be replaced with a dash ``-''. Up to five qname lowat hiwat triplets may be present. strcat str1 str2 Concatenate strings str1 and str2 and return the result- ing string. return val Set the return value for the current function to val. Note: executing a return command does not terminate exe- cution of the current function. Files /etc/strcf See also strcf(SFF), intro(ADMP)