Uutry(8)                            CLIX                            Uutry(8)



  NAME

    Uutry - Tries to contact a remote system with debugging on

  SYNOPSIS

    /usr/lib/uucp/Uutry [-x debug_level] [-r] system_name

  FLAGS

    -x debug_level   Overrides the default level of debugging.

    -r               Overrides the default retry time in the
                     /usr/spool/uucp/.status file.

  DESCRIPTION

    The Uutry command is a shell that is used to invoke uucico to call a
    remote site.  By default, debugging is turned on.  (The default is level
    5).  The -x flag overrides the default level.  The -r flag overrides the
    retry time in /usr/spool/uucp/.status.  The debugging output is put in the
    /tmp/system_name file.  A tail -f of the output is executed.  A <Delete>
    or <Break> gives control back to the terminal while uucico continues to
    run, putting its output in /tmp/system_name.

  FILES

    /usr/lib/uucp/Systems

    /usr/lib/uucp/Permissions

    /usr/lib/uucp/Devices

    /usr/lib/uucp/Maxuuxqts

    /usr/lib/uucp/Maxuuscheds

    /usr/spool/uucp/*

    /usr/spool/locks/LCK*

    /usr/spool/uucppublic/*

    /tmp/system_name

  RELATED INFORMATION

    Commands:  uucico(8), uucp(1), uux(1)






  2/94 - Intergraph Corporation                                              1