NAME

newfs − construct a new file system

SYNOPSIS

/etc/newfs [ options ] [ mkfs-options ] special disk-type

DESCRIPTION

Newfs is a “friendly” front-end to the mkfs(8) program.  Newfs will look up the type of disk a file system is being created on in the disk description file /etc/disktab , calculate the appropriate parameters to use in calling mkfs, then build the file system by forking mkfs . 

OPTIONS

−N Causes the file system parameters to be printed out without actually creating the file system. 

−v Prints out newfs’s actions, including the parameters passed to mkfs. 

Options which may be used to override default parameters passed to mkfs are:

−b block-size
The block size of the file system in bytes.

−c #cylinders/group
The number of cylinders per cylinder group in a file system. The default value used is 16.

−f frag-size
The fragment size of the file system in bytes.

−i number of bytes per inode
This specifies the density of inodes in the file system. The default is to create an inode for each 2048 bytes of data space. If fewer inodes are desired, a larger number should be used; to create more inodes a smaller number should be given.

−m free space %
The percentage of space reserved from normal users; the minimum free space threshhold.  The default value used is 10%.

−o optimization preference (“space” or “time”)
The file system can either be instructed to try to minimize the time spent allocating blocks, or to try to minimize the space fragmentation on the disk. If the value of minfree (see above) is less than 10%, the default is to optimize for space; if the value of minfree greater than or equal to 10%, the default is to optimize for time.

−r revolutions/minute
The speed of the disk in revolutions per minute (normally 3600).

−s size The size of the file system in sectors. 

−S sector-size
The size of a sector in bytes (almost never anything but 512).

−t #tracks/cylinder
The number of tracks per cylinder.

FILES

/etc/disktabfor disk geometry and file system partition information
/etc/mkfsto actually build the file system

SEE ALSO

disktab(5), fs(5), diskpart(8), fsck(8), format(8), mkfs(8), tunefs(8)

M. McKusick, W. Joy, S. Leffler, R. Fabry, “A Fast File System for UNIX”, ACM Transactions on Computer Systems 2, 3.  pp 181-197, August 1984.  (reprinted in the System Manager’s Manual, SMM:14)

BUGS

Newfs should figure out the type of the disk without the user’s help. 

5 BSD  —  May 21, 1986