Invokes the Librarian Utility to  create,  modify,  or  describe  an
  object, macro, help, text, or shareable image library.

  Format:


    LIBRARY  library-file-spec [input-file-spec[,...]]

Additional information available:

ParametersCommand QualifiersPositional QualifierExamples

 library-file-spec

  Specifies the name of the library you want to create or modify.

  If the file specification does not include a file type, the  LIBRARY
  command assumes a default type of OLB, indicating an object library.


 input-file-spec[,...]

  Specifies the names of one or more files that  contain  modules  you
  want to insert or replace in the specified library.

  If  you  specify  more  than  one  input  file,  separate  the  file
  specifications   with  commas.   The  input-file-spec  parameter  is
  required when you specify /REPLACE, which is the  LIBRARY  command's
  default operation, or /INSERT, which is an optional qualifier.

  When you use the /CREATE qualifier to  create  a  new  library,  the
  input-file-spec parameter is optional.  If you include an input file
  specification with /CREATE, the LIBRARY command first creates a  new
  library,  and  then inserts the contents of the input files into the
  library.

Additional information available:

/BEFORE/COMPRESS/CREATE/CROSS_REFERENCE/DATA
/DELETE/EXTRACT/FULL/GLOBALS/HELP/HISTORY/INSERT
/LIST/LOG/MACRO/NAMES/OBJECT/ONLY/OUTPUT
/REMOVE/REPLACE/SELECTIVE_SEARCH/SHARE/SINCE/SQUEEZE
/TEXT/WIDTH

 /BEFORE[=time]

 Used in conjunction with the /LIST qualifier  to  specify  that  only
  those modules inserted earlier  than  a  particular  time be listed.
  You can specify an absolute time or a combination  of  absolute  and
  delta times.

  If you omit the /BEFORE qualifier, all modules are listed regardless
  of date.  If you specify /BEFORE without a date or time, all modules
  inserted before today are listed by default.

 /COMPRESS[=(option[,...])]

 Recovers space that had been occupied by  modules  deleted  from  the
  library.  When you specify /COMPRESS, the LIBRARY command by default
  creates a new  version  of  the  library  in  your  current  default
  directory.   You  can use options to the /COMPRESS qualifier to make
  some specifications in the new version of the library different from
  the original library.

 /CREATE[=(option[,...])]

 Creates a new library.  When you specify /CREATE, you can  optionally
  specify a file or a list of files that contains modules to be placed
  in the library.

  By default, the LIBRARY command creates an  object  module  library;
  specify  /SHARE,  /MACRO,  /HELP,  or  /TEXT  to  change the default
  library type.

 /CROSS_REFERENCE[=(option[,...])]

 Requests a cross-reference listing of an object library.

  If  you  omit  this  qualifier,  cross-reference  listings  are  not
  provided.   If  you  specify  /CROSS_REFERENCE without specifying an
  option, you will obtain by  default  cross-reference  listings  that
  contain symbols by name and symbols by value.

 /DATA=option

 Used with the REDUCE or EXPAND options, produces a library that is in
  data-reduced  format, or expands a library currently in data-reduced
  format.

  REDUCE         Produces a library in data-reduced format.  Libraries
                 stored  in  data-reduced  format  require  less  disk
                 space; however, access to such libraries generally is
                 slower.

  EXPAND         Expands a library currently  stored  in  data-reduced
                 format.   Libraries  stored  in normal format require
                 more disk space; however  access  to  such  libraries
                 generally is faster.

  There is no default  option  for  the  /DATA  qualifier.   You  must
  specify one and only one of the options each time you use /DATA.

  Note that the /DATA qualifier and either option produces an implicit
  /COMPRESS  of  the  library.  This occurs just as if you had entered
  /COMPRESS.  As the data format is expanded or reduced,  the  library
  command  recovers  space  that  had been occupied by modules deleted
  from the library.

 /DELETE=(module[,...])

 Deletes modules from a library.  If you specify more than one module,
  separate them with commas and enclose the list in parentheses.

 /EXTRACT=(module[,...])

 Copies one or more modules from  a  library  into  a  file.   If  you
  specify  more than one module, separate the module names with commas
  and enclose the list in parentheses.

  Wildcard characters are allowed in the module specification.

  If you specify the /OUTPUT qualifier in conjunction  with  /EXTRACT,
  the  LIBRARY  command  writes  the  output into the specified output
  file.  If you specify /EXTRACT  and  do  not  specify  /OUTPUT,  the
  LIBRARY command writes the output into a file that has the same file
  name as the library and a file type of OBJ, MAR, EXE, HLP,  or  TXT,
  depending on the type of library.

 /FULL

 Requests a full description of each module in the module name table.
       module-name [Ident nn] Inserted dd-mmm-yyyy hh:mm:ss [n
       symbols]

 /GLOBALS
 /NOGLOBALS

  Controls, for object module libraries, whether the names  of  global
  symbols in modules being inserted in the library are included in the
  global symbol table.

  By default, the LIBRARY command places all global  symbol  names  in
  the  global  symbol  table.   Use  /NOGLOBALS if you do not want the
  global symbol names included in the global symbol table.

 /HELP

 Indicates that the library is a help library.  When you  specify  the
  /HELP qualifier, the library file type defaults to HLB and the input
  file type defaults to HLP.

  For information on  how  to  create  help  files,  see  the  VMS
  Librarian Reference Manual.

 /HISTORY

 Used with the /LIST qualifier to request that update  history  record
  headers  be  listed  (for  libraries  that contain a history) in the
  format:
       username operation n modules on dd-mmm-yyy hh:mm:ss

  The operation referred to in the header has  one  of  three  values:
  replaced, inserted, or deleted.

  When used with /LIST/FULL,  /HISTORY  requests  that  the  names  of
  updated modules be listed in addition to the update history headers.

 /INSERT

 Adds the contents of one or more files to a library.   If  an  object
  module  file  specified  as  input  consists  of concatenated object
  modules, the LIBRARY command  creates  a  separate  entry  for  each
  object  module in the file; each module name table entry reflects an
  individual module name.  If a macro or help file specified as  input
  contains  more  than  one  definition, the LIBRARY command creates a
  separate entry for each one, naming the module  name  table  entries
  according  to the names specified on the .MACRO directives or in the
  HELP format.

  When the LIBRARY command inserts modules into an  existing  library,
  it  checks the module name table before inserting each module.  If a
  module name or global symbol name already exists in the library, the
  command  issues  an error message and does not add the module to the
  library.

 /LIST[=file-spec]
 /NOLIST

  Controls whether or not the LIBRARY command creates a  listing  that
  provides information about the contents of the library.

  By default, no listing is produced.  If you specify /LIST without  a
  file  specification,  the  LIBRARY command writes the output file to
  the current SYS$OUTPUT device.  If you include a file  specification
  that does not have a file type, the LIBRARY command uses the default
  file type of LIS.

  No wildcard characters are allowed in the file specification.

  If you specify /LIST in conjunction  with  qualifiers  that  perform
  additional  operations  on  the library, the LIBRARY command creates
  the listing after completing all other requests; thus,  the  listing
  reflects the status of the library after all changes have been made.

 /LOG
 /NOLOG

  Controls  whether  the  LIBRARY  command   verifies   each   library
  operation.   If  you  specify /LOG, the LIBRARY command displays the
  module name, followed by the library operation  performed,  followed
  by the library file specification.

 /MACRO

 Indicates that the library is a  macro  library.   When  you  specify
  /MACRO,  the  library  file  type defaults to MLB and the input file
  type defaults to MAR.

 /NAMES
 /NONAMES

  Controls, when /LIST is specified  for  an  object  module  library,
  whether the LIBRARY command lists the names of all global symbols in
  the global symbol table as well as the module names  in  the  module
  name table.  The default is /NONAMES, which does not list the global
  symbol names.

  If the library is a macro, help, or text  library  and  you  specify
  /NAMES, no symbol names are displayed.

 /OBJECT

 Indicates that the library is an object  module  library.   Libraries
  are  assumed  to  be  object module libraries unless you specify the
  /SHARE, /MACRO, /TEXT, or /HELP qualifier.  The  library  file  type
  for  object module libraries defaults to OLB and the input file type
  defaults to OBJ.

 /ONLY=(module[,...])

 Used with the /LIST or  /CROSS_REFERENCE  qualifier  to  specify  the
  individual  modules  on which the LIBRARY command may operate.  When
  you use the /ONLY qualifier, the  LIBRARY  command  lists  or  cross
  references only those modules specified.

  If you specify more than one module, separate the module names  with
  commas and enclose the list in parentheses.

  Wildcard characters are allowed in the module name specifications.

 /OUTPUT=file-spec

 Specifies,   when   used   with   the   /EXTRACT,    /COMPRESS,    or
  /CROSS_REFERENCE  qualifier,  the  file  specification of the output
  file.

  For /EXTRACT, the output file contains the modules extracted from  a
  library;  for  /COMPRESS,  the  output  file contains the compressed
  library;  for  /CROSS_REFERENCE,  the  output  file   contains   the
  cross-reference listing.

  No wildcard characters are allowed in the file specification.

 /REMOVE=(symbol[,...])

 Deletes global symbol entries from the  global  symbol  table  in  an
  object  library.  If you specify more than one symbol, separate them
  with commas and enclose the list in parentheses.

  If you want to verify the  names  of  the  deleted  global  symbols,
  specify the /LOG qualifier.

  Wildcard characters are allowed in the symbol specifications.

 /REPLACE

 Replaces one or  more  existing  library  modules  with  the  modules
  specified in the input files.  The LIBRARY command first deletes any
  existing library modules with the same name as the  modules  in  the
  input files.  Then, the new version of the module is inserted in the
  library.  If a module contained in an input file  does  not  have  a
  corresponding module in the library, the LIBRARY command inserts the
  new module in the library.

  /REPLACE is the LIBRARY command's default operation.  If you use the
  /LOG  qualifier  with  the  /REPLACE  qualifier, the LIBRARY command
  displays the names of each module that it replaces or inserts.

 /SELECTIVE_SEARCH

 Defines the input files being inserted into a library  as  candidates
  for   selective   searches   by   the   linker.    If   you  specify
  /SELECTIVE_SEARCH, the linker selectively searches the modules  when
  the  library  is  specified as a linker input file; the linker takes
  from the library, for the symbol table of  its  output  image  file,
  only  those  global  symbols  that  have  been  referenced  by other
  modules.

 /SHARE

 Indicates that the library is a shareable image library.  The library
  file  type  for  shareable  image  libraries defaults to OLB and the
  input file type defaults to EXE.

 /SINCE[=time]

 Used in conjunction with the /LIST qualifier  to  specify  that  only
  those modules inserted later than a particular time be listed.   You
  can specify an absolute time or a combination of absolute and  delta
  times.   See  the  VMS DCL Concepts Manual for details on specifying
  times.

  If you omit the /SINCE qualifier, all modules are listed  regardless
  of  the  date.   If  you  specify /SINCE without a date or time, all
  files created since the start of today are listed by default.

 /SQUEEZE
 /NOSQUEEZE

  Controls whether the LIBRARY command  compresses  individual  macros
  before  adding  them to a macro library.  When you specify /SQUEEZE,
  which is the default, trailing blanks, trailing tabs,  and  comments
  are deleted from each macro before insertion in the library.

  Use /SQUEEZE in conjunction with the /CREATE, /INSERT, and  /REPLACE
  qualifiers  to  conserve  space  in a macro library.  If you want to
  retain the full macro, specify /NOSQUEEZE.

 /TEXT

 Indicates that the library is a text library.  When you use the /TEXT
  qualifier,  the library file type defaults to TLB and the input file
  type defaults to TXT.

 /WIDTH=n

 Controls the screen display width (in characters) when listing global
  symbol   names.   Specify  the  /WIDTH  qualifier  with  the  /NAMES
  qualifier to limit the line length of the /NAMES display.

  The default display width is the width of the listing  device.   The
  maximum width is 132.

Additional information available:

/MODULE

 /MODULE=module-name

 Specifies the module name of a text module.  Unlike help, object, and
  macro   libraries,  text  libraries  use  the  file  name  from  the
  input-file-spec parameter as the  module  name.   If  you  want  the
  module  to  have  a different name from the input file name, use the
  /MODULE qualifier to identify the added module.

  No wildcard characters are allowed in the module name.

  You can also use the  /MODULE  qualifier  to  enter  a  text  module
  interactively.

  If you specify SYS$INPUT as the input file  specification  and  also
  issue  the  /MODULE qualifier, the LIBRARY command includes the text
  you enter from the console in the  specified  library  module.   (To
  terminate the console input, press CTRL/Z.)

  1.   $ LIBRARY/CREATE TESTLIB ERRMSG,STARTUP

  The  LIBRARY  command  creates  an  object  module   library   named
  TESTLIB.OLB and places the modules ERRMSG.OBJ and STARTUP.OBJ in the
  library.

  2.   $ LIBRARY/INSERT TESTLIB SCANLINE
       $ LINK TERMTEST,TESTLIB/LIBRARY

  The LIBRARY command adds the  module  SCANLINE.OBJ  to  the  library
  TESTLIB.OLB.   The  library  is  specified as input to the linker by
  using the /LIBRARY qualifier on the LINK  command.   If  the  module
  TERMTEST.OBJ refers to any routines or global symbols not defined in
  TERMTEST, the linker will search the global symbol table of  library
  TESTLIB.OLB to resolve the symbols.

  3.   $ LIBRARY/EXTRACT=(ALLOCATE,APPEND)/OUTPUT=MYHELP -
       $_SYS$HELP:HELPLIB.HLB

  The LIBRARY command specifies that the modules ALLOCATE  and  APPEND
  be  extracted  from  the  help library HELPLIB.HLB and output to the
  file MYHELP.HLP.