rdist(1) rdist(1)NAME rdist - distributes remote files SYNOPSIS rdist [-b] [-dvar=value] [-fdistfile] [-h] [-i] [-mhost] [-n] [-q] [-R] [-v] [-w] [-y] [name]... rdist [-b] -c name... [-h] [-i] [-n] [-q] [-R] [-v] [-w] [-y] [login@] host [:dest] ARGUMENTS -b Specifies binary comparison. Perform a binary comparison and update files if they differ rather than comparing dates and sizes. -c name Forces rdist to interpret the remaining arguments as a small distfile. The equivalent distfile is as follows. ( name...) ->[login@]host install [dest]; -dvar=value Defines var to have value. The -d option is used to define or override variable definitions in the distfile. value can be the empty string, one name, or a list of names surrounded by parentheses and separated by tabs and/or spaces. :dest Specifies the destination system on which the files will be distributed. -fdistfile Causes the program to first look for distfile, then Distfile to use as the input, if this option is not present. If no names are specified on the command line, rdist will update all of the files and directories listed in distfile. Otherwise, the argument is taken to be the name of a file to be updated or the label of a command to execute. If label and filenames conflict, it is assumed to be a label. These may be used together to update specific files using specific commands. -h Follows symbolic links. Copy the file that the link points to rather than the link itself. host Specifies the local host system. -i Ignores unresolved links. rdist will normally try to maintain the link structure of files being transferred January 1992 1
rdist(1) rdist(1)and warn the user if all the links cannot be found. login @ Specifies the login name used on the destination host. The login name is the same as the local host unless the destination name is of the format login@host. -mhost Limits which machines are to be updated. Multiple -m arguments can be given to limit updates to a subset of the hosts listed in distfile. -n Prints the commands without executing them. This flag option is useful for debugging distfile. -q Specifies quiet mode. Files that are being modified are normally printed on standard output. The -q option suppresses this. -R Removes extraneous files. If a directory is being updated, any files that exist on the remote host that do not exist in the master directory are removed. This is useful for maintaining truly identical copies of directories. -v Verifies that the files are up to date on all the hosts. Any files that are out of date will be displayed but no files will be changed nor any mail sent. -w Specifies whole mode. The whole filename is appended to the destination directory name. Normally, only the last component of a name is used when renaming files. This will preserve the directory structure of the files being copied instead of flattening the directory structure. For example, renaming a list of files such as (dir1/f1 dir2/f2) to dir3 would create files dir3/dir1/f1 and dir3/dir2/f2 instead of dir3/f1 and dir3/f2. -y Specifies younger mode. Files are normally updated if their mtime and size (see stat(2)) disagree. The -y option causes rdist not to update files that are younger than the master copy. This can be used to prevent newer copies on other hosts from being replaced. A warning message is printed for files which are newer than the master copy. DESCRIPTION rdist is a program to maintain identical copies of files over multiple hosts. It preserves the owner, group, mode, and mtime (see stat(2)) of files if possible and can update 2 January 1992
rdist(1) rdist(1)programs that are executing. rdist reads commands from distfile to direct the updating of files and/or directories. If distfile is ``-'', the standard input is used. Replace distfile with a sequence of entries that specify the files to be copied, the destination hosts, and what operations to perform to do the updating. Each entry has one of the following formats. <variable name> = <namelist> [label:] <source list> -> <destination list> <command list> [label:] <source list> :: <time_stamp file> <command list> The first format is used for defining variables. The second format is used for distributing files to other hosts. The third format is used for making lists of files that have been changed since some given date. The ``source list'' specifies a list of files and/or directories on the local host which are to be used as the master copy for distribution. The ``destination list'' is the list of hosts to which these files are to be copied. Each file in the source list is added to a list of changes if the file is out of date on the host which is being updated (second format) or the file is newer than the time stamp file (third format). Labels are optional; they are used to identify a command for partial updates. Newlines, tabs, and blanks are only used as separators and are otherwise ignored. Comments begin with ``#'' and end with a newline. Variables to be expanded begin with ``$'' followed by one character or a name enclosed in braces (see the examples at the end). The source and destination lists have the following format: <name> or ``('' <zero or more names separated by white-space> ``)'' The shell metacharacters ``['', ``]'', ``{'', ``}'', ``*'', and ``?'' are recognized and expanded (on the local host only) in the same way as csh(1). They can be escaped with a backslash. The ~ character is also expanded in the same way as csh but is expanded separately on the local and destination hosts. When the -w option is used with a filename that begins with ~, everything except the home directory is appended to the destination name. File names which do not begin with // or ~ use the destination user's January 1992 3
rdist(1) rdist(1)home directory as the root directory for the rest of the filename. The command list consists of zero or more commands of the following format. install <options>opt_dest_name; notify <name list> ; except <name list> ; except_pat <pattern list> ; special <name list>string; The install command is used to copy out of date files and/or directories. Each source file is copied to each host in the destination list. Directories are recursively copied in the same way. The parameter, ``opt_dest_name'', is optional and is used to rename files. If no install command appears in the command list or the destination name is not specified, the source filename is used. Directories in the pathname will be created if they do not exist on the remote host. To help prevent disasters, a nonempty directory on a target host will never be replaced with a regular file or a symbolic link. However, under the -R option, a nonempty directory will be removed if the corresponding filename is completely absent on the master host. The options are -R, -h, -i, -v, -w, -y, and -b and have the same semantics as options on the command line except they only apply to the files in the source list. The notify command is used to mail the list of files updated (and any errors that may have occurred) to the listed names. If no @ appears in the name, the destination host is appended to the name (e.g., name1@host, name2@host,...). The except command is used to update all of the files in the source list except for the files listed in ``name list''. This is usually used to copy everything in a directory except certain files. The except_pat command is like the except command except that ``pattern list'' is a list of regular expressions (see ed(1) for details). If one of the patterns matches some string within a filename, that file will be ignored. Note that since \ is a quote character, it must be doubled to become part of the regular expression. Variables are expanded in ``pattern list'' but not shell file pattern matching characters. To include a $, it must be escaped 4 January 1992
rdist(1) rdist(1)with \. The special command is used to specify sh(1) commands that are to be executed on the remote host after the file in ``name list'' is updated or installed. If the ``name list'' is omitted then the shell commands will be executed for every file updated or installed. The shell variable FILE is set to the current filename before executing the commands in ``string.'' A string starts and ends with quotes ( ) and can cross multiple lines in distfile. Multiple commands to the shell should be separated by ;. Commands are executed in the user's home directory on the host being updated. The special command can be used to rebuild private databases, etc. after a program has been updated. EXAMPLES The following is a small example. HOSTS = ( matisse root@arpa) FILES = ( /bin /lib /usr/bin /usr/games /usr/include/{*.h,{stand,sys,vax*,pascal,machine}/*.h} /usr/lib /usr/man/man? /usr/ucb /usr/local/rdist ) EXLIB = ( Mail.rc aliases aliases.dir aliases.pag crontab dshrc sendmail.cf sendmail.fc sendmail.hf sendmail.st uucp vfont ) ${FILES} -> ${HOSTS} install ; except /usr/lib/${EXLIB} ; except /usr/games/lib ; special /usr/lib/sendmail "/usr/lib/sendmail -bz" ; srcs: /usr/src/bin -> arpa except_pat ( \\.o\$ /SCCS\$ ) ; IMAGEN = (ips dviimp catdvi) imagen: /usr/local/${IMAGEN} -> arpa install /usr/local/lib ; notify ralph ; ${FILES} :: stamp.cory notify root@cory ; STATUS MESSAGES AND VALUES A complaint about mismatch of rdist version numbers may really stem from some problem with starting your shell, e.g., you are in too many groups. January 1992 5
rdist(1) rdist(1)LIMITATIONS Source files must reside on the local host where rdist is executed. There is no easy way to have a special command executed after all files in a directory have been updated. Variable expansion only works for name lists; there should be a general macro facility. rdist aborts on files which have a negative mtime (before Jan 1, 1970). There should be a ``force'' option to allow replacement of nonempty directories by regular files or symlinks. A means of updating file modes and owners of otherwise identical files is also needed. FILES /usr/bin/rdist Executable file /tmp/rdist* Temporary file for update lists SEE ALSO sh(1), csh(1) stat(2) in A/UX Programmer's Reference 6 January 1992